Paver driveway installation day moves quickly: we install most residential paver driveways in a single day once any old concrete is out. Here is what happens and what you need to do.
Before the crew arrives
- Move vehicles out of the driveway and off the street in front of it.
- Make sure the garage can stay closed or has another way out.
- Mark sprinkler heads and any landscape lighting near the edges.
1. Removal
If you are replacing concrete, we break out the old slab and haul it away. This can be loud for a few hours.
2. Excavation and base
We dig the area to driveway depth, then place crushed stone and compact it in lifts. We set the slope so water runs away from the garage.
3. Bedding and pavers
Next, we screed a level bedding layer and lay the pavers in your chosen pattern, starting from a straight reference line. Then we cut the edges and around obstacles.
4. Edges and joint sand
We install edge restraint along open sides. Finally, we sweep in joint sand and compact the surface so the pavers lock together.
After the install
You can walk on the pavers right away. Plan on 24–48 hours before driving on them. If you plan to seal, ask about timing; see our sealer guide.
Paver Driveway Installation Day Checklist

On paver driveway installation day, the main things to plan for are access and noise. Let neighbors know if trucks will be parked on the street, keep pets inside, and leave a clear path to the side yard if the crew needs it. At the end, we walk the finished driveway with you. For the standards behind each step, see the Interlocking Concrete Pavement Institute (ICPI).
Thinking about a new driveway? Venice Pavers & Landscape offers a free on-site walk-through and a written, itemized estimate. Request your estimate or see our paver driveway options.


